EasyManua.ls Logo

Mobotix Q26 - Network Connection and Power Supply, UPS

Mobotix Q26
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
Q26 Camera Manual: Installation
2.1.4 Network Connection And Power Supply, UPS
Power Over Ethernet (PoE Conforming to IEEE 802.3af)
All Q26 models are supplied with power using the PoE standard. The Network Power Adapter
(MX-NPA-PoE-Set) may be used for smaller installations. For larger installations, it is worth
investing in a PoE capable supply device available on the market.
The
maximum length
of the network cable for power supply over an Ethernet cable is
100 m
.
The Mx2wire+ media converter set (available as an accessory) can be used to extend the
range of an Ethernet connection up to 500 m in length (maximum transmission speed for a
500-m cable: 45 Mbps and 12 W for the PoE device).
Note
The MOBOTIX Q26 can be powered by switches or routers which support the PoE (Power-
over-Ethernet) standard and conform to IEEE 802.3af.
Advantages of PoE power supply:
Allows setting up centralized backup power supply via the network.
Reduces energy consumption.
No extra network connection for camera required.
The Q26 supports the Power
over Ethernet standard
IEEE 802.3af (PoE)
PC or POWER
CAMERA
PoE Adapter
MX-NPA-PoE
LAN or POWER
The Network Power Adapter
replaces the crossover
cable when directly con-
necting to a computer

Table of Contents

Other manuals for Mobotix Q26

Related product manuals