49
Available Accessories
1.4.12 NPA-PoE-Set
Order no.: MX-NPA-PoE-EU and MX-NPA-PoE-INT (Version EU and Version INT)
Order no.: MX-CBL-NPA-BAT-2 (battery cable for mobile voltage sources)
This is a multifunctional PoE injector according to the IEEE
802.3af standard – with three connectors (for network,
camera/PoE device, PC), universal power supply unit with
interchangeable adapter plugs and crossover function.
The NPA-PoE-Set connects and remotely supplies a Q26
with power via an Ethernet cable up to 100 m in length.
The blue adapter can also be connected to mobile voltage
sources from 12 to 57 V DC by means of an additionally
available battery cable. The “EU” version of the NPA-PoE-
Set is supplied as standard with a European adapter, while
the “INT” version includes four adapters (EU, USA, UK, AUS).
1.4.13 MX-Overvoltage-Protection-Box
Order no.: MX-Overvoltage-Protection-Box-RJ45
Order no.: MX-Overvoltage-Protection-Box-LSA
Weatherproof network connector (protection class IP65,
–30 to 60 °C/–22 to 140 °F)
with surge protection of up
to 4 kV for MOBOTIX IP cameras
, ideal for replacing the
MX-Patch-Box.
At the same time, the MX-Overvoltage-Protection-Box
provides a weatherproof connection of a camera’s patch
cable to a network patch cable (
-RJ45
variant) or a network
installation cable (
-LSA
variant).
1.4.14 MX-NPA-Box
Order no.: MX-OPT-NPA1-EXT
The MX-NPA-Box is a weatherproof PoE injector conforming
to the IEEE 802.3af standard and is designed to connect
external voltage sources (12 to 57 V DC) to a MOBOTIX camera.
The MX-NPA-Box is equipped with the Patch-Box’s weather-
proof and extremely compact exterior housing (protection
class IP65, –30 to 60 °C/–22 to 140 °F), which means it can
also be installed in the space of the Outdoor Wall Mount.
Interfaces of the MX-NPA-Box: Camera via patch cable,
Ethernet via LSA+ and external power supply via terminal
connector (12 to 57 V DC possible).
To Next Page
Loading...
