11. TEST PROGRAMS
52
When the program finishes, the display will read:
VACUUM TEST
TEST PASSED
-0.01 bar 17:44
The end of the program is signaled with a beep.
NOTE
IF THE PRESSURE CHANGE EXCEEDS THE PRE-SET LIMIT, THE PROGRAM IS INTERRUPTED
AND ALARM MESSAGE IS GENERATED
.
S
EE A COMPLETE DESCRIPTION OF THE ALARMS IN APPENDIX E .
The duration of the test is about 18 minutes.
When the door is opened at the end of the program, a report of the test cycle is printed with all
the salient data.
For complete details about printed reports, please refer to the examples shown in Appendix
B, Programs.
To Next Page
Loading...
