From the DOOR menu, you can
establish:
- the door status (closed/locked)
μSw Door
- the status of the closing system
microswitches μSw Lock
- the values of the current absorbed
by the motor during the different
door closing phases I motor
The door can be manually
unlocked, locked and fully opened.
During the door closing and locking
phases, the variations of the I motor
parameter are displayed in the
digital bar at the bottom of the
DOOR screen.
The operation of the level sensors
located inside the tanks can be
checked in the TANK
MANAGEMENT section.
When a sensor is lifted, the relevant
box lights up.
To Next Page
Loading...
