SpectraMax iD3 Multi-Mode Microplate Reader User Guide
130 5054747 B
Item Description
Altitude
Restrictions
Up to 2000m (6562ft)
Air Pressure
Restrictions
54kPa to 106kPa (7.8PSI to 15.4PSI)
Sound Pressure
Level
Maximum sound pressure: 73dBA
Maximum sound pressure at one meter: 68dBA
Installation
Category
II
Pollution Degree 2
Data Connection One Ethernet Port
NFCAntenna
Reader/Writer
SANGOMA-MSMA 2V3 13.56 Mhz Multi Standard - Multi Antenna Reader/Writer
Contains FCC ID: 2AKHW-SANGMSMA1 Contains IC: 22202-SANGMSMA1
Changes or modifications made to this equipment not expressly approved by the
party responsible for compliance may void the FCC authorization to operate this
equipment.
Table A-6: Physical Specifications of the iD3 Instrument (continued)
Injector Specifications
When your instrument has the SpectraMax Injector System, the specifications for
measurements using the injector are shown in the following table.
Item Description
Name Injector
Weight 1.7kg (3.7lbs)
Microplate formats 6, 12, 24, 48, 96, and 384-well microplates
Read modes The injector system is method independent. You can run injector protocols
for the following read modes: Absorbance, Luminescence (all wavelength),
Luminescence Monochromator, Fluorescence Intensity top, and
Fluorescence Intensity bottom.
Type Single emission
Light source None
Labels/Substrates Labels compatible with the wavelength range
Detection limit,
optimized
20 amol ATP (“Flash” luminescence using Promega ENLITEN
®
ATPAssay
System)
Detection limit,
guaranteed
50 amol ATP (<=> 250 fM @ 0.2mL/well, “Flash” luminescence using
Promega ENLITEN ATP Assay System)
Linear dynamic range 5 logs in a single microplate read
Table A-7: Measurement Specifications for the Injector