Chapter 3: Home Page
5054747 B 63
Instrument Maintenance
The Instrument tab on the Maintenance page enables you to view instrument information.
Figure 3-17: Maintenance page - Instrument tab
If you power off the instrument or if you disconnect the Ethernet cable and then reconnect
the Ethernet cable, the instrument IPaddress can change. Touch Refresh to update the
display of the Assigned IP address.
From the buttons on the left, touch to display the Maintenance page.
Touch Instrument to display the Instrument tab and to view the following information.
Computer Name
Firmware Version
PICVersion
Serial Number
Device Number
Assigned IP
Software Version
Touch Back to return to the Home Page on page 43.