5 • 223
Equipment
2004 • LaPalma
The sofa hide-a-bed will convert easily into a bed. Clear
the area of obstruction and debris. The sofa comes equipped
with safety belts to be worn if occupied during travel.
Sofa to Sleeper:
• Remove the three seat cushions to access the
hide-a-bed. The seat cushions should be stored
safely until the bed is converted back to a sofa.
• Release the lock on the right side of metal bar,
grasp the front metal bar and lift up pulling out
on the bar slightly until the leg of the bed is
firmly resting on the floor.
• Fold seat belts out of the way.
• When the legs of the bed are firmly on the
floor there will be another lifting bar exposed
to complete the conversion process.
• Grasping and opening the lifting bar will open
the bed fully. The bed is now ready for linen.
Sleeper to Sofa:
• Remove all bedding from the hide-a-bed.
• Grasp the foot of the hide-a-bed in the center
using the metal lifting bar.
• Fold over the bottom portion of the bed that
will form the seat.
• Lift the front portion of the lifting bar to raise
and lower the hide-a-bed back into the sofa
base.
• Position the seat belts for use.
• Replace the seat cushions.
SOFA
Hide-A-Bed
020222d
To Next Page
Loading...
