5 • 225
Equipment
The Air Mattress inflates and deflates in a matter of a few seconds.
Inflating the mattress is accomplished by using an electric pump. The pump
operates from any 120 Volt AC outlet.
To Inflate the Mattress:
• Open sofa and allow the mattress to lie flat.
• Unzip the corner of the mattress labeled “Air Pump Access”.
• Ensure the valve is locked securely in place.
• Remove the cap from the valve by squeezing the tabs on each
side of cap.
• Place the pump into the valve and turn pump ¼ turn clockwise
to lock pump into valve.
• Plug in the pump motor to inflate to a desired firmness.
• Remove the pump, reinstall the cap on the valve and zip the “Air
Pump Access” cover closed. The bed is now ready for linen.
To Deflate the Mattress:
• Remove bedding items.
• Unzip the corner cover of the mattress labeled “Air Pump
Access”.
• Press tab on the side of valve and pivot valve up to release the
air in mattress.
• Once mattress is deflated allow valve to rest loosely on valve
seat, DO NOT LOCK VALVE CLOSED.
• Zip the “Air Pump Access” cover closed and close the sofa.
2004 • LaPalma
Air Mattress
(Optional)
020260b
To Next Page
Loading...
