8 • 311
Electrical Systems
2004 • LaPalma
The inverter uses a battery temperature sensor to adjust charge voltage.
When the battery temperature rises the sensor sends this information to the
inverter to decrease charge voltage. Voltage compensation with
temperature variation is necessary to keep charge voltage at optimum values.
The sensor is secured to the terminal of the battery.
Battery Capacity and Idle Mode are adjustable. The program mode must
be entered to change a setting.
To Enter the Programming Mode:
• Press and hold the SETUP button for five seconds. LED lamps
will change from green to red.
• If a setting change does not occur within five seconds, the
remote returns to the user menu.
• Use the Remote Owner’s Manual to cross-reference the LED
lights to their respective indication.
Idle Mode:
Setting the IDLE mode controls the threshold (in watts) that turns the
inverter on from search mode. The adjustment range is 5 to 100 watts. The
factory setting is five watts. Press the INVERT button to change the settings.
Battery Capacity:
Setting the proper battery capacity tailors the internal charger to optimum
values. The Factory setting is 400. Press the CHARGE button to change the
settings.
Programming the
Inverter
Temperature
Sensitive Charging
To Next Page
Loading...
