User Manual
13
5.3 Main Menu
5.3.1 Display setup
Go to [Main menuCamera] to set up the CH name and position for each channel shown as Picture 5-3.
You can set up whether each channel can be previewed or not under Live display and/or record mode,
enable live time or not under live screen and set up record time or not on the record history.
Please note that the name of each channel supports up to eight characters or four Chinese characters.
Copy function: allow you copy all data of one channel to any other channel.
You can adjust image brightness, saturation, contrast and hue parameters of each channel after entering
into [Color] menu.(shown as picture 5-4).
The modifications will be available after clicking [APPLY] button on the bottom of the sub-menu windows
and being prompted to save and then clicking [ok] button.
If you want to cancel the modification, click [Exit] button to exit the menu.
When clicking [DEFAULT] button, all system default values will be reset to default value.
System default value indicates the ex-factory default setting.
5.3.2 Record setup
Click [Main Menu] [Record] to enter into [Record Setup] menu (Shown as Picture 5-6).
[Record] option allows you set up record status (Enable/Disable) of each channel.
After clicking right button of mouse, pop-up menu appears on
the screen. You can click [main menu] option on pop-up menu
mode to enter into Main menu interface (Shown as Picture 5-2). In
Main Menu mode, you can control device management settings,
such as Display, Record, Network, Search, Device and System
setting etc.
Picture5-2
Picture 5-4Picture 5-3 Picture 5-5
Picture 5-6 Picture 5-7
To Next Page
Loading...
