User Manual
23
After entering into <System> menu, you are allowed to set time/date, password, language and A/V, check
system information and perform system maintenance.
5.3.7.1 Time Set
Click [Main menu system] and enter into the time set interface shown as Picture 5-35. Now you can
adjust system date/time, date/time format and time zone.
NTP: the model provides NTP service. When NTP function is set to <On> , select relative NTP server
(include: time.windows.com; time.nist.gov or pool.ntp.org) and click <Update now>, and system will check and
adjust system time at every 23:50:00pm and/or each restart
DST: Click <DST set> to set DST (day saving time) status and mode shown as Picture 5-36.
5.3.7.2 Password
Click [Main menuSystemPassword] to enter into [user manage] interface shown as Picture 5-37.
Click [Edit user] to enter into password set interface shown as Picture 5-38.
You can setup a user password and administrator password respectively shown as Picture 5-39. The
password consist of numbers 0~9 and supports up to 6 characters.
The password defaulted by system is 123456.
5.3.7.3 Video/Audio Setup
Click [Main MenuSystemVideo/Audio] to setup Video and Audio parameters shown as Picture 5-39 (a).
Picture 5-35 Picture 5-36Picture 5-34
Picture 5-39Picture 5-37 Picture 5-38
Picture 5-41 Picture 5-40
To Next Page
Loading...
