Motoman XRC Series User Manual

SAFETY
Spot Welding Manual for Medar 2-2 MOTO MAN
2.2 Standard Conventions
This manual includes information essential to the safety of personnel and
equipment. As you read through this manual, be alert to the four signal words:
• DANGER
• WARNING
• CAUTION
•NOTE
Pay particular attention to the information provided under these headings which
are defined below (in descending order of severity).
DANGER!
Information appearing under the DANGER caption concerns the
protection of personnel from the immediate and imminent hazards
that, if not avoided, will result in immediate, serious personal injury
or loss of life in addition to equipment damage.
WARNING!
Information appearing under the WARNING caption concerns the
protection of personnel and equipment from potential hazards that
can result in personal injury or loss of life in addition to equipment
damage.
CAUTION!
Information appearing under the CAUTION caption concerns the
protection of personnel and equipment, software, and data from
hazards that can result in minor personal injury or equipment
damage.
NOTE: Information appearing in a NOTE caption provides additional information which is helpful in
understanding the item being explained.

Motoman XRC Series Specifications

General

Programming Language	INFORM III
Communication Ports	Ethernet
Power Requirements	200-220 VAC single phase, 50/60 Hz, 1.5 kVA
Mounting	Floor mount
Operating Temperature	0°C to 45°C
Humidity	20% to 80% (non-condensing)
Storage Temperature	-20°C to 60°C