Symbologies 4 - 79
Data Matrix
Parameter # 292
To enable or disable Data Matrix, scan the appropriate bar code below.
Data Matrix Inverse
Parameter # 588
This parameter sets the Data Matrix inverse scanner setting. Options are:
•
Regular Only - the scanner decodes regular Data Matrix bar codes only.
•
Inverse Only - the scanner decodes inverse Data Matrix bar codes only.
•
Inverse Autodetect - the scanner decodes both regular and inverse Data Matrix bar codes.
*Enable Data Matrix
(1)
Disable Data Matrix
(0)
*Regular
(0)
Inverse Only
(1)
Inverse Autodetect
(2)
To Next Page
Loading...
Need help?
General
