Motorola CS4070 - Aztec; Aztec Inverse

Symbologies 4 - 83
Aztec
Parameter # 574
To enable or disable Aztec, scan the appropriate bar code below.
Aztec Inverse
Parameter # 589
This parameter sets the Aztec inverse scanner setting. Options are:
• Regular Only - the scanner decodes regular Aztec bar codes only.
• Inverse Only - the scanner decodes inverse Aztec bar codes only.
• Inverse Autodetect - the scanner decodes both regular and inverse Aztec bar codes.
*Enable Aztec
(1)
Disable Aztec
(0)
Regular
(0)
Inverse Only
(1)
*Inverse Autodetect
(2)