3 - 22 CS4070 Scanner Product Reference Guide
Transmit “No Read” Message
Parameter # 94
Scan a bar code below to select whether or not to transmit a No Read message. Enable this to transmit the
characters NR when a successful decode does not occur before trigger release or during the timeout period.
Disable this to send nothing to the host if a symbol does not decode.
Scan Data Transmission Format (continued)
<PREFIX> <DATA> <SUFFIX 1>
(5)
<PREFIX> <DATA> <SUFFIX 2>
(6)
<PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>
(7)
NOTE If you enable Transmit No Read, and also enable Symbol Code ID Character or AIM Code ID Character
for Transmit Code ID Character on page 3-19, the scanner appends the code ID for Code 39 to the NR
message.
Enable No Read
(1)
*Disable No Read
(0)
To Next Page
Loading...
