Motorola CS4070 User Manual

Getting Started 1 - 9
TimeFormat 12h
24h
Time format for batch data. Set to enable
time stamp . See Set Time on page 3-5 to
set the time.
Enter no value to disable the time stamp,
for example: “
TimeFormat = “
24h
(Enable)
ScanParam Variable Any scan engine parameter. Multiple
entries are allowed. Sent after reset or
when engine is powered.
For example:
ScanParam=0xf0,0x00,0x01
ScanParam=0xee,0x01
ScanParam=0x38,0x00
<none>
Sleep Integer Time in seconds before the scanner enters
sleep mode when no activity is detected.
0
BTSleep Integer Time in seconds before the scanner enters
sleep mode while paired to another
Bluetooth device when no activity is
detected.
0
ButtonPlus Enable
Disable
Enable or disable the Plus button. Enable
ButtonMinus Enable
Disable
Enable or disable the Minus button. Enable
ButtonBT Enable
Disable
Enable or disable the BT button. Enable
WakeUpLED Enable
Disable
Enable or disable the wake-up LEDs. Enable
LEDBlue Enable
Disable
Enable or disable the blue LED for normal
operation and wake up.
Enable
LEDGreen Enable
Disable
Enable or disable the green LED for
normal operation and wake up.
Enable
LEDRed Enable
Disable
Enable or disable the red LED for normal
operation and wake up.
Enable
LEDAmber Enable
Disable
Enable or disable the amber LED for
normal operation and wake up.
Enable
CodeID Enable
Disable
Enable or disable saving CodeID in the
scanned bar codes file. See
Code Type
IDs on page D-1
.
Enable
ScanLED Enable
Disable
Enable or disable the LEDs that illuminate
while the scanner is active.
Enable
AutoReconnect Enable
Disable
Enable or disable automatic Bluetooth
reconnection to dongle or another device.
Disable
Table 1-1 Config.ini File Content (Continued)
Parameter Values Description Default

Motorola CS4070 Specifications

General

Brand	Motorola
Model	CS4070
Category	Barcode Reader
Language	English