MPP Solar MPI 12KW WP - Page 63

60
49
BUCK BOOST is
over temperature
BUCK BOOST
temperature is too
high.
1. Check the ambient
temperature and fans.
2. If the error message still
remains, please contact your
installer.
50
Relay version error
Internal
components failed.
Please contact your installer.
52
PV1 Over
temperature
PV1 temperature is
too high.
1. Check the ambient
temperature and fans.
2. If the error message still
remains, please contact your
installer.
53
DC/DC board of
internal battery is
over temperature
The temperature of
DC/DC board in
internal battery is
too high.
1. Check the ambient
temperature and fans.
2. If the error message still
remains, please contact your
installer.
54
Inverter over
temperature
Inverter
temperature is too
high.
1. Check the ambient
temperature and fans.
2. If the error message still
remains, please contact your
installer.
56
DCDC is over
temperature
DCDC temperature
is too high.
1. Check the ambient
temperature and fans.
2. If the error message still
remains, please contact your
installer.
57
Control board is
over temperature
Control panel
temperature is too
high.
1. Check the ambient
temperature and fans.
2. If the error message still
remains, please contact your
installer.
58
External battery is
over temperature
The temperature of
external battery is
too high.
1. Check the ambient
temperature and fans.
2. If the error message still
remains, please contact your
installer.
59
DC/DC board of
battery is over
temperature.
The temperature of
DC/DC board in
battery is too high.
1. Check the ambient
temperature and fans.
2. If the error message still
remains, please contact your
installer.