MPP Solar MPI 12KW WP - Page 89

86
There are three ways to modify setting and they vary according to each parameter.
a) Listing options to change values by tapping one of it.
b) Activate/Shut down functions by clicking “Enable” or “Disable” button.
c) Changing values by clicking arrows or entering the numbers directly in the
column.
Each function setting is saved by clicking “Set” button.
Please refer to below parameter setting list for an overall description and be noted that
the available parameters may vary depending on different models. Please always see the
original product manual for detailed setting instructions.
Parameter setting list:
Item
Description
Output setting
Output source priority
To configure load power source priority.
AC input range
Input voltage range selection
Output voltage
To set output voltage.
Output frequency
To set output frequency.
Battery
parameter
setting
Battery Type
Select connected battery type
Battery Cut-off Voltage
Set battery cut-off voltage