9 Operation
Maschinenfabrik Reinhausen GmbH 2021 897817454/02 EN TAPCON
®
230 Expert
9.1.11.1 User roles
The access rights to the device functions and settings are controlled using a
hierarchical system of roles. The system has five different roles with different
access rights. Some of these access rights are fixed, but you can configure
the access rights to particular parameters and events. Note the Setting ac-
cess rights to parameters and events [►Section 9.1.11.4, Page 91] section.
If you are not logged in on the device, you will assume the "Data display"
user role.
Upon delivery, the following roles are provided:
Role Description
Data display User who can only view data of relevance to operation.
▪ Display all parameters
▪ Display all events
Diagnostics User who can view data and log data of relevance to oper-
ation.
▪ Display all parameters
▪ Display all events
▪ Export log data
Operator User who can view data of relevance to operation and ac-
knowledge events. The user can perform manual tap-
change operations using the device's controls.
▪ Display all parameters
▪ Display and acknowledge all events
Parameter configura-
tor
User who can view and modify data of relevance to opera-
tion.
▪ Display and modify all parameters
▪ Import and export parameters
▪ Display, modify, and acknowledge all events
Administrator User who can view and modify all data.
▪ Read all parameters
▪ Display, modify, and acknowledge all events
Table24: Roles in delivery status
Access to the following areas of the device is linked to the roles:
Function Data display Diagnostics Operator Parameter
configurator
Administrator
Administration - - - - +
Restart device - - + + +
Import - - - + +
Export - + - + +
To Next Page
