Need help?Do you have a question about the mru NOVA compact and is the answer not in the manual?
General| Power Supply | Rechargeable Li-Ion battery |
|---|---|
| Operating Temperature | -20°C to +50°C |
| Gas Types | O2, CO, NO2, SO2, H2S, CO2 |
| Data Storage | Internal memory |
| Interface | USB |
| Resolution | O2: 0.1 Vol.%; CO: 1 ppm |
| Accuracy | ±2% of reading |
Essential safety procedures, handling of chemicals, and battery usage recommendations.
Steps for unpacking, inspecting, charging, and initial checks before using the analyzer.
Configuration options for display, language, country-specific settings, and user preferences.
Setting up measurement programs, CO limits, fuel types, and display windows.
Enabling and understanding the core flow search function for optimal measurement.
Recommendations for annual service checks, calibration, and the service maintenance plan.
Using internal/external power sources and understanding battery charge status.
Ensuring correct operating temperature for accurate measurements and avoiding condensation.
Checking and emptying the condensate separator and its filter status.
Verifying proper fit of connectors and performing leak tightness tests.
Steps for powering on the analyzer and initiating the zeroing process.
Procedure for finding the optimal measurement point within the stack.
Managing CO limits, visual indication of exceeding limits, and sensor protection.
Importing and exporting sites, flue gas, and differential pressure measurements via SD card.
Using service values to diagnose potential sensor or system defects.
Performing a system leak proof test to ensure integrity.
Step-by-step guide for updating the analyzer's firmware using an SD card.
Connecting the analyzer to a PC/Laptop via USB for data transfer.
Common error messages, their causes, and recommended solutions for the analyzer.
To Next Page
