mru NOVA compact - Differential Temperature Measurement; Flow Monitoring (Option); CHP Measurement (Option)

USER MANUAL
NOVA
compact
MRU GmbH, D-74172 Neckarsulm
28 / 50
7.15. Differential temperature measurement
In the differential temperature measurement menu two temperatures can be measured
simultaneously by using the T1 and T2 connectors. Both measured temperatures and the
difference between the temperatures will be displayed.
Note:
The accuracy of the difference temperature measurement is guaranteed only on use of
the MRU temperature sensors.
7.16. Flow monitoring (option)
The optional flow monitoring in case of an error the following message will be displayed.
7.17. CHP Measurement (option)
For measurements on CHPs must be used a Purafil filter at the connectors 19 and 20 for CO
Sensor protection.