USER MANUAL
compact
MRU GmbH, D-74172 Neckarsulm
11.5. Analysis and calculations
Continuous measured values
2
Temp. Ambient air (Thermo-Element)
Temp. Flue gas (Thermo-Element)
[ ppm ] related to. on 0% rest O
2
[ ppm ] related to. on fuel type dependent O
2
[ mg/m
3
] on fuel type dependent O
2
Further continously caculated values
2
Losses and efficiency are calculated by means of net calorific value.
These values are than referenced for the gross calorific value for condensing boilers only.
(efficiency > 100)
The calculations of efficiency and exhaust losses are performed using Siegert’s formula.