• All models are available as Remote Sensor models
(FIGURE 1-2). Combustible gas models require the remote
explosion-proof sensor module.
To determine your sensor type and options, check the shipping
carton (FIGURE 1-3) and sensor ID label. Checked items are
included in the carton.
Identifying Your Unit
To determine your model type and other installed options
(FIGURES 1-1 and 1-4), check the ID label on the shipping
carton (FIGURE 1-3). This label identifies:
• target gas, sensor location and range
• sampling accessories (if applicable)
• visual and audible alarm options
• output accessories
• mounting hardware.
Figure 1-2.
Remote Sensor Model
Figure 1-3.
Shipping Carton Label Identifying Sensor Type
Chapter 1, Set-up
1-3
To Next Page
Loading...
