Appendix
I
ImPact NS50 Specifications
General
410mm x 327mm x 69mmDimensions
5.9kg packagedWeight
4 x MST composite bre ports (1000Base-LX)
4 x PoE ports
Connectivity
2 x 802.11b/g Radio ports
4 x RP-TNC antenna ports (with diversity support)
Powder-coated stainless steel enclosure, sealed to comply with an Ingress Protection
standard rating of IP65
Enclosure Ingress
Protection (IP)
rating
0ºC to 50ºC (operating)
-20ºC to 80ºC (storage)
Operating
Temperature
5- 95%Operating Humidity
Power
24 VDC nominal
8-54 VDC operating (PoE requires a 15-54 VDC supply. <15 may cause instability,
>54 may damage connected PoE devices)
Supply Voltage
60 VDC maximum input voltage (>60 will damage the unit)
Replaceable slow blow thermal fuses (on voltage arrestor/transient suppression
board.)
Protection
Power
Consumption
Maximum
(W)
Idle (W)
PoE 48V rail
Enabled
PoE 48V rail
Disabled
PoE 48V rail
Enabled
PoE 48V
rail
Disabled
CongurationPart
Number
11.310.58.67.81 x Access Point Radio, 2 x Gbps
Fibre Ports
NS5001
13.012.210.49.92 x Access Point Radio, 2 x Gbps
Fibre Ports
NS5002
NS50 User Guide113Revision C