EasyManuals Logo

MST Impact NS5004 User Guide

MST Impact NS5004
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
1.
Conguring a TFTP server on the network. The ICA is precongured for this purpose. For a 3rd party
server, please consult the vendor for instructions.
2.
Dening a site conguration le which contain global settings to all network devices on the site.
3.
Dening device conguration les which contain specic settings for each device, which override
global settings.
4.
Applying the conguration les to each device and rebooting.
6.3 TFTP Parameters
Below is a brief description of the types of congurable parameters for the NS50. For information on
specic parameters, please contact MST.
Network
network.1.* - Common LAN settings for all devices on the network.
Configuration Management
tftp.* - Only required for 3rd party TFTP servers or ICA v1.3.1 and earlier.
System
system.* - Network names, contact details and passwords.
NTP (Network Time Protocol)
time.ntp.* - NTP server settings for the network switch.
Logging
syslog.* - System message logging settings.
SNMP (Simple Network Management Protocol)
snmp.* - At present, the ICA only uses this protocol to monitor for Port Up/Port Down errors on the
NS50, and is not affected by these settings. adjust only if required for 3rd party monitoring software.
Asset Tracking and Location Servers
tracking.* - Positioning/Tracker engines settings. This is where AeroScout tag and Wi-Fi client device
information is sent. Conguration is not required when communicating with an AeroScout positioning
engine.
tracking.tracker.x.* - These settings congure up to two MST Tracker Engines that the access point
will send information to. The "x" in each parameter is replaced by the tracking engine number.
VLAN Configuration
vlan.* - VLANs are used to separate different types of network trafc to and from the ICA.
vlan.entry.x.* - Up to 8 VLANs can be dened, the "x" in each address is replaced by the VLAN
number 1-8. By default, the site conguration le has some VLANs predened based on commonly
used applications.
Note: The Infrastructure VLAN cannot be edited or disabled because the management CPU is
on this VLAN.
NS50 User Guide91Revision C
Centralised Conguration Management

Table of Contents

Other manuals for MST Impact NS5004

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MST Impact NS5004 and is the answer not in the manual?

MST Impact NS5004 Specifications

General IconGeneral
BrandMST
ModelImpact NS5004
CategorySwitch
LanguageEnglish

Related product manuals