MST Impact NS5004 User Guide

Configuring WEP Security Settings
To congure WEP security settings:
1.
Click on the WEP option button.
2.
In the WEP Key Length drop-down box, select 64bit or 128bit. 128bit is a more secure encryption
type.
3.
Enter the password for the WEP Key number that will be used.
4.
Select the Default WEP Key from the drop-down box.
5.
Select Authentication from the drop-down box. By default it is set to Open, which is more secure
than Shared.
5.5.6 Configuring EAP (Extensible Authentication Protocol)
The Wireless EAP conguration screen is used to congure wireless authentication by a RADIUS server
(as used by WPA Enterprise).
Revision C74NS50 User Guide
Conguration Using the Web Interface

MST Impact NS5004 Specifications

General

Brand	MST
Model	Impact NS5004
Category	Switch
Language	English