MST Impact NS5004 User Guide

Tip 2: Obstructions
Antennas should be mounted to avoid signal obstruction from rock, vehicles, equipment and machinery.
Tip 3: RF Field Overlap
Multiple antennas should be mounted to avoid crossing signal paths.
The positioning of the antennas is crucial when AeroScout tags are used for asset tracking and location
services. AeroScout tags will not be read when there are antenna standing wave nulls. Antennas need to
be positioned to have best reception of tag messages.
For Antenna mounting options, see Antenna Mounting Options on page 26.
Revision C22NS50 User Guide
Network System Design

MST Impact NS5004 Specifications

General

Brand	MST
Model	Impact NS5004
Category	Switch
Language	English