Note: Before starting this procedure, note the following
• The device's MAC address in STATUS > DEVICE INFO
.
• Settings on the device that differ from the Site Defaults.
It is recommended that a client device (PC or laptop) has a wired connection to the network device to
upgrade the rmware. Please contact your MST System Engineer for rmware les.
To upgrade the rmware:
1.
Click Choose File. A dialog box will open.
2.
Select the binary (.bin) rmware le and click Open.
Revision B38Wireless Access Point User Manual
Conguration Using the Web Interface
To Next Page
Loading...
Need help?
General