Cutting Decks
157
• For a 42” timed “R” deck, See Figure 8.16.
5. Reinstall and/or tighten all belt guards and keepers that were loosened to get the PTO belt off.
6. Install the deck in reverse order of removal.
7. Test drive the tractor and engage the cutting deck before returning it to service. Make sure the belt is engaging
properly and that the blade brake system is working properly. Blade brake servicing will be covered later in this
chapter.
Figure 8.16
PTO belt
Timing belt
FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
