Configuring the display in the Service application
Basic display settings
7
⇨ The application start screen will appear:
2. Tap "Terminal".
⇨ A list of parameters will appear. See the table below.
3. To change the value of any of the parameters, tap the desired parameter.
⇨ A window will appear, into which you can input the value of the parameter as a number, or
select from a list.
4.
- Confirm.
5. Restart the display.
Parameters in the “Terminal” menu
Brightness of the display screen during the day.
Brightness of the display screen at night.
Time difference in relation to GMT.
Language of the applications on the display screen.
Screenshot When this parameter is activated, you can create screenshots on
VT number Parameters from the ISO standard
Number that should be given to the display on the ISOBUS.
Login as ISOBUS-VT Activate this parameter if you want the ISOBUS job computer to
be displayed on the display. This parameter must be activated in
most instances. On very few self-propelled agricultural machines,
the parameter must be deactivated.
To Next Page
Loading...
Need help?
General