Muller Elektronik TRACK-Guide III User Manual

Tractor-ECU application
Results
8
31302713-02-US
V9.20191001
59
Task-related counter
These counters are transmitted to the ISOBUS-TC App. You can activate the counters in a task, and
they will then appear in the additional window as soon as the ISOBUS-TC App is minimized.
Task-related counter
Counter designation
Unit
This is documented
Distance km Distance during which the work position sensor was
activated.
Time in working position h Time during which the work position sensor was
activated.
Working position 0/1 0 = not in working position
1 = in working position
8.4.2

Muller Elektronik TRACK-Guide III Specifications

General

Brand	Muller Elektronik
Model	TRACK-Guide III
Category	Automobile Electronics
Language	English