CARRIER SPECIFIC INFORMATION
24 MultiConnect
®
rCell 100 MTR-EV3 User Guide
#913 PRL - Error - network error
#915 PRL - Error - update failed for other reasons
#DREL Data session release
Sprint Network Initiated (NI) or Client Initiated (CI) Firmware Update Management Object (FUMO)
Notifications
#907 FUMO - Firmware DM session started or started again until no more updates are available
#911 FUMO - credential error
#912 FUMO - unreachable server
#913 FUMO - network error
#915 FUMO – update fails with other reasons
#916 FUMO - Firmware done, no firmware update
#919 FUMO - Firmware downloaded successfully
#920 FUMO - Firmware download progress (percent)
#921 FUMO - Firmware download start
#921 FUMO - Firmware size get from the OMA-DM server (byte)
#929: 200 FUMO - Firmware Update Success
#929: 402 FUMO - Firmware corrupted , CRC error
#929: 403 FUMO - Firmware package mismatch
#929: 404 FUMO - Firmware signature failed
#929: 406 FUMO - Firmware update authentication failed
#929: 410 FUMO - Firmware update General Error
#930 FUMO - Firmware reporting firmware update result to server
#DREL Data session release
Sprint Additional Network Initiated Alert Indications (NIA Retry)
#926 NIA - NIA retry start
#927 NIA - Notification done with no NIFA information
#928 NIA - NIA digest mismatch error
OMA-DM Commands
These commands are available after the unsolicited indication #900 appears, which means DM client is ready.
AT#OMADMSVADDR=<URL> Set OMA-DM server address (default
https://oma.ssprov.sprint.com/oma)
AT#OMADMSVADDR? Read OMA-DM server address
AT#OMADMSVPORT=<port#> Set OMA-DM server (default 443)
To Next Page
Loading...
Need help?
General
