Multitech MultiConnect rCell 100 User Manual

CARRIER SPECIFIC INFORMATION
MultiConnect
®
rCell 100 MTR-EV3 User Guide 25
AT#OMADMSVPORT? Read OMA-DM server
AT#OMADMPROXY=<port#>,<URL> Set OMA-DM proxy server port/URL (default
http://oma.ssprov.sprint.com:80)
AT#OMADLPROXY=<port#>,<URL> Set OMA-DL Proxy DL Server Port URL (default
http://oma.ssprov.sprint.com:80)
AT#OMADMCEN=<onoff> Set OMA-DM Client feature; Disable=0, Enable=1
Important: Never deploy devices with AT#OMADMCEN=0. Many
OMA commands result in error if OMADMCEN is set to 0.
AT#OMADMCEN? Query the current OMA-DM client status
AT#OMADMCEN=? Query OMA-DM available values
AT+OMADM=(onoff) Set OMA-DM Client Initiated Device Configuration; Disable=0, Enable=1,
Initiate=2
AT+OMADM=? Query OMA-DM Client Initiated Device setting
AT+PRL=<onoff> Set OMA-DM CIPRL Session; Disable=0, Enable=1, Initiate=2
AT+PRL=? Query OMA-DM CIPRL Session setting
AT+FUMO= Set OMA-DM FUMO enable parameter; Disable=0, Enable=1, Initiate=2
AT+FUMO=? Query OMA-DM FUMO parameter
AT#HFA Initiate Sprint Hands Free Activation (HFA)
AT#HFACANCEL Cancel Sprint Hands Free Activation (HFA) DM Session
AT$RTN=xxxxxx HFA reset (after device reboot HFA will occur) xxxxxx= SPC or MSL.
Note: May not work with all firmware versions.
AT#SPRTN=xxxxxx After device reboot HFA will occur xxxxxx= SPC or MSL
AT#DCCANCEL Cancel Device Configuration (DC) Session
AT#PRLCANCEL Cancel Preferred Roaming List (PRL) Session
AT$PRL? Query Preferred Roaming List (PRL) ID #
AT#FUMOCANCEL Cancel Firmware Update Management Object (FUMO) session.
Sprint Successful Indications
Typical Successful HFA Session
Indications
Alternate Successful HFA Session
Indications
Typical Successful FUMO Session
Indications With firmware update
#900 #900 #907
#904 #904 #921
#919 #914 #921: 572 Bytes
#905 #905 #920:23
#909 #910 #920:100
#907 #900 New firmware installing

Multitech MultiConnect rCell 100 Specifications

General

Brand	Multitech
Model	MultiConnect rCell 100
Category	Network Router
Language	English