DEVICE ADMINISTRATION
MultiConnect
®
rCell 100 MTR-EV3 User Guide 79
Field Description
Via WAN/Cellular If checked, the device will listen and respond to HTTPS
requests from the WAN. This increases susceptibility to
malicious activity.
Timeout Minutes Amount of time a user's session can remain dormant
before automatically being logged out.
HTTPS Security
Configure the HTTPS security settings (like version and cipher suite). Click the Show to the right under Security
Settings. Must select SSL/TLS under Protocol.
Field Description
Use default cipher suite Enables use of the default cipher (check by default). No
other user input is required.
TLS 1.2 or TLS 1.1 Check which version of the TLS protocol you want to
use: TLS 1.2 or TLS 1.1. (Use default cipher suite must
be unchecked.)
Cipher Suite Name Check your preferred Cipher Suite from the following
list: ECDHE-RSA-AES256-GCM-SHA384,ECDHE-RSA-
AES256-SHA, DHE-RSA-AES256-GCM-SHA384, AES256-
SHA, ECDHE-RSA-AES128-GCM-SHA256,ECDHE-RSA-
AES128-SHA, DHE-RSA-AES128-GCM-SHA256, DHE-RSA-
AES128-SHA, and/or AES128-SHA
SSH
The device's internal system can be accessed securely via SSH. This is intended for advanced troubleshooting
and/or custom deployment solutions.
Field Description
Enabled Enables SSH redirect which automatically redirects users
trying to access the device via SSH.
Port The port on which the device listens for SSH requests.
Via LAN/Ethernet If checked, the device listens and responds to SSH
requests from the LAN.
Via WAN/Cellular If checked, the device listens and respond to SSH
requests from the WAN.
SSH Security
Configure the SSH security settings (like ciphers and HMAC). Click Show to the right under Security Settings. Must
select SSL/TLS under Protocol.
Field Description
Use default cipher suite Enables use of the default cipher (check by default). No
other user input is required.
To Next Page
Loading...
Need help?
General
