USING THE WIZARD TO CONFIGURE YOUR DEVICE
MultiConnect
®
rCell 100 MTR-EV3 User Guide 31
b. In the Flow Control field, select the flow control option from the drop down list provided. Choose
from NONE or RTS-CTS.
c. In the Parity field, select the parity option from the drop down list. Choose from NONE, ODD, or
EVEN.
d. In the Data Bits field, select the data bits option from the drop down list. Choose from 7 or 8.
e. In the Stop Bits field, select the stop bit option from the drop down list. Choose from 1 or 2.
9. Click Finish.
10. To save your settings, click Save and Restart.
To Next Page
Loading...
