Transport, Set-up, Putting into operation
Betriebsanleitung 07.06.2005 10/43
ba_c500_50s2GB06.fm ega
Electrical Connection
– Read the nominal voltage from the nameplate. Does it conform to the
power supply voltage?
If the rotational directon is incorrect, the vacuum pump can be destroyed,
so:
– switch it off immediately!
– reverse the 2 phases of the supply line (only by a qualified electrician).
– Check the rotational direction of the vacuum pump.
(Arrow on the vacuum pump motor).
Hz
A
kW
A
Netzsicherung
External fuse
Typ/Model
Ser. No.
Bauj./Year
V
To Next Page
Loading...
