Operation
Betriebsanleitung 07.06.2005 27/43
ba_c500_50s2GB06.fm ega
Displaying or changing separation time
The heat for separation is created by a temporary flow of electrical current
through the separation bar.
Thin pouches require a lower separation time, thick ones more. Recom-
mendation for standard pouches (PA/PE): 1.4 seconds
– Press SEALING key briefly repeatedly.
– The separation time appears flashing in the digital display. (LED "s"
lights up).
Change:
– As long as the display blinks, press one of the keys INCREASE VAL-
UE, DECREASE VALUE.
s
To Next Page
Loading...
