1
2
3
4
Advanced fax functions
Scanner related settings 4-7
7
Specify the destinations, and press <Start>.
•For details on specifying the destinations, see “Specifying destinations” (page 5-2).
•If you loaded the document in the automatic document feeder, this concludes the procedure.
•When the loaded documents have been scanned, the message “Set next document.” is
displayed.
8
Load the next document, and press [Scan NextPage].
9
Repeat step 8 to scan all the documents.
10
When you have finished scanning all the documents, press [Tx Start Sending].
To Next Page
