Murray E20M42 - Maintenance and Adjustments; Maintenance Schedule and Tasks

17
MAINTENANCE
MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
* More often in hot (over 85°F: 30°C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
† These services should be performed by your dealer.
RIDER MAINTENANCE, All Models
Before
Each Use
Spring
and Fall
8
Hours
25
Hours
100
Hours
200
Hours
Yearly
Clean Debris from Rider and Engine Compartment *
•
Clean Debris from Engine Cooling Areas and Air
Filter *
•
Check Tire Pressure
•
Lubricate Rider and Mower *
•
Clean Deck and Check/Replace Mower Blades
•
Clean Battery and Cables
•
Check Rider Safety System **
• • •
Check/Adjust PTO Clutch
•
ENGINE MAINTENANCE,
20HP Briggs & Stratton
8 Hours or
Daily
25 Hours or
Every
Season
50 Hours or
Every
Season
100 Hours or
Every
Season
Yearly
Check Engine Oil Level *
•
Service Air Pre-Cleaner *
•
Change Oil *
•
Service Air Filter *
•
Change Oil and Filter *
•
Clean Cooling Fins *
•
Replace Air Filter *
•
Replace Spark Plug
•
Replace Fuel Filter †
•
Check Valve Clearance †
•
Not for
Reproduction