VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL Before using
3.6 Print quality adjustment 157
g. Press the [>] key on Operation panel.
• "Thickness 170µm" is displayed on the operation panel. (The default is set to 170µm. If the
default value has been changed, the changed value is displayed.)
h. Press the [+] key or [-] key and enter the thickness of the paper to use in the range of 80µm to
2800µm.
• This setting is the same as
5.1.1.1.8 Media thickness menu.
i. Press the [Enter] key on Operation panel.
• Media thickness value is set.
• "Adjust print1: Standard" is displayed on Operation panel.
To Next Page
Loading...
Need help?
General