Panel setup menu VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
274 5.1 Setup menu
5.1.28 Heater Control menu
This function is to specify the heater control modes depending on the usages.
• This function is not displayed for VJ-1938WX/1638WX.
5.1.28.1 VJ-1638X
Paper cocklings may occur during printing when heated. This can be minimized by selecting an
appropriate setting as follows.
Setup item Setting Description
Heater Ctrl <Normal> Default setting.
Select Normal if paper cocklings do not occur.
Fixer Select Fixer to reduce waiting times before printing and paper
cocklings.
Dryer Select Dryer to keep the drying performance after printing
when using a Heavy-Duty Take-up Unit and minimize paper
cocklings.
—
• [Enter] key: saves the setting and shifts to the selected
menu.
• [Cancel] key: cancels the setting value and shifts to the
previous menu.
5.1 Setup menu
To Next Page
Loading...
Need help?
General