Maintenance VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
342 6.4 Moving or transporting the printer
6.4 Moving or transporting the printer
This section describes how to move or transport the printer.
6.4.1 Moving the printer
This section describes how to move the printer.
• When moving the printer, make sure to maintain a horizontal position.
• Do not slant the printer, prop it against a wall or turn it upside down.
The ink inside the printer may leak.
Moreover, normal operation after shifting (to these positions) cannot be guaranteed.
(1) Preparation before moving
When using the dedicated Stands, follow the procedure below to move the printer.
1. Make sure that the printer is turned OFF.
3.2.2 Turning the power OFF
2. Dispose of waste fluid.
6.3 Disposal of waste fluids
3. Remove all the cables, such as Power cord set.
4. Loosen the four adjusters of Stand as shown in the next illustration.
To Next Page
Loading...
