MUTOH VJ-1638X - Replacing Roll Media

VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL Maintenance
6.1 Replacing consumable components 299
6.1.2 Replacing Roll Media
This section describes when and how to replace the roll media.
(1) Replacement time
Replace the roll media when the following situation occurs.
a. When the roll media loaded in the printer runs out
• "End Of Roll" is displayed on Operation panel.
• If media runs out during printing, the printer stops printing.
b. When you want to change the media type to use
(2) Type
TIP
For types and details of the roll media, refer to 8.3 Options/Supply list.
(3) Replacing steps
Follow the procedure below to replace the roll media.
NOTE
• For VJ-2638, refer to the operation manual of Heavy take-up unit. Instruction Manual for Heavy-
Duty take-up unit. “4.5 Removing the paper core”
• The operation manual of Heavy-Duty take-up unit is included in the printerAfs operation manual
CD-ROM.
1. If the printer is turned ON, confirm that operation such as printing is not in progress.