Appendix VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
364 8.1 Product specifications
8.1 Product specifications
8.1.1 Printer specifications
Items Specification
Model name VJ-2638
VJ-1638X
VJ-1938WX
VJ-1638WX
Printing method On-demand piezo drive system
Drive system Firmware servo/DC motor drive
Media feed system Multipoint pressurizing grid roller system
Media fixing system Pressurization roller down system by manual lever
Media feed/ejection Rear feed/Front ejection
Roll media outer diameter <VJ-2638>
250mm or less
<VJ-1638X/1938WX/1638WX>
150mm or less
Roll media weight <VJ-2638>
100kg or less
<VJ-1638X/1938WX/1638WX>
30kg or less
Maximum media width <VJ-2638>
2,642 mm
<VJ-1938WX>
1,910mm
<VJ-1638X/1638WX>
1,625 mm
Minimum media width 900 mm
Maximum media thickness 0.3 mm (when the head height is Low)/1.3 mm (when the head height is Mid)/
2.8 mm (when the head height is High)
Maximum printable media width <VJ-2638>
2,632 mm
<VJ-1938WX>
1,900 mm
<VJ-1638X/1638WX>
1,615 mm
Print margin Top: 5 mm (15 mm after media initialization or after winding the media
manually, 40 mm when media initialization front edge detection is ON or after
cutting the media), Bottom: 5 mm (102 mm at the roll media end), Left: 5 mm
to 25 mm, Right: 5 mm to 25 mm.
Media cut system Horizontal automatic cut system/manual cut system
Head height adjustment Three-level adjustment of Low, Mid, and High
CPU 64-bit RISC CPU
Memory 384MB
Command MH-RTL (RTL-PASS)
To Next Page
Loading...
Need help?
General