VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL Panel setup menu
5.1 Setup menu 229
Strike Wait Sets up the waiting time while overwrite printing.
•[Enter] key: shifts to the sub menu.
5.1.13 Strike Wait menu
Slant Check Sets up slanting detection during media loading.
•[Enter] key: shifts to the sub menu.
5.1.14 Slant Check menu
Auto Cleaning Sets up the time for auto cleaning during standby, before printing, and during printing.
•[Enter] key: shifts to the sub menu.
5.1.15 Auto Cleaning menu
Ink Status Displays the various information about Ink cartridges (ink status) that are installed in Slots.
•[Enter] key: shifts to the sub menu.
5.1.16 Ink Status menu
Roll Length Sets up the roll media length.
•[Enter] key: shifts to the sub menu.
5.1.17 Roll Length menu
Exhaust fan Set the operation of Exhaust fan.
•[Enter] key: shifts to the sub menu.
5.1.18 Exhaust Fan menu
Longstore Wash Print head with the cleaning fluid.
•[Enter] key: shifts to the sub menu.
CR Maintenance Performs maintenance.
•[Enter] key: shifts to the sub menu.
5.1.20 CR Maintenance menu
Initialization Returns the settings of the printer to default.
•[Enter] key: shifts to the sub menu.
5.1.21 Initialization menu
Life Times Displays the operational life time of each part.
•[Enter] key: shifts to the sub menu.
5.1.22 Life Times menu
IP Address Sets the IP address of the printer.
•[Enter] key: shifts to the sub menu.
5.1.23 IP Address menu
Subnet Mask Sets the subnet mask of the printer.
•[Enter] key: shifts to the sub menu.
5.1.24 Subnet Mask menu
Gateway Sets the gateway.
•[Enter] key: shifts to the sub menu.
5.1.25 Gateway menu
Header dump Set whether or not to display the Header dump menu.
•[Enter] key: shifts to the sub menu.
5.1.26 Header Dump menu
Single Head You can set whether or not to perform printing using only one Print head.
•[Enter] key: shifts to the sub menu.
5.1.27 Single Head menu
Setup item Description
To Next Page
Loading...
Need help?
General