MUTOH VJ-1638X - Page 232

Panel setup menu VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
232 5.1 Setup menu
Setup item Setting Description
Type 1 to 15 Print Mode Sets up the print mode according to the usage of print data or print speed.
• [Enter] key: shifts to the sub menu.
5.1.1.1.1 Print Mode menu
Adjust Print Sets up when adjusting the printer for the optimum quality of image print.
• [Enter] key: shifts to the sub menu.
5.1.1.1.2 Adjust Print menu
PF Adjust Sets up various settings on the media feed compensation.
• [>] key: shifts to the sub menu.
5.1.1.1.3 Media feed compensation
Pre-heater Sets the temperature of Pre-heater.
NOTE
• This function is not displayed for VJ-1938WX/
1638WX.
• [Enter] key: shifts to the sub menu.
5.1.1.1.4 Pre-heater menu (VJ-2638/1638X)
Platen heater Sets the temperature of Platen heater.
NOTE
• This function is not displayed for VJ-1938WX/
1638WX.
• [Enter] key: shifts to the sub menu.
5.1.1.1.5 Platen Heater menu (VJ-2638/1638X)
Dryer Sets the temperature of Dryer.
NOTE
• This function is not displayed for VJ-1938WX/
1638WX.
• [Enter] key: shifts to the sub menu.
5.1.1.1.6 Dryer menu (VJ-2638/1638X)
Vacuum Fan Sets up vacuum fan operation.
• [Enter] key: shifts to the sub menu.
5.1.1.1.7 Vacuum Fan menu
Media Thickness Set the thickness of the media you are using.
• [Enter] key: shifts to the sub menu.
5.1.1.1.7 Vacuum Fan menu
UserCopy Copies the setting values of the user type currently selected to a different
user type collectively.
• [Enter] key: shifts to the sub menu.
5.1.1.1.9 UserCopy menu