Panel setup menu VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
280 5.4 Menu Option menu
Multi Strike Off Off Sets up whether to display the Multi Strike menu.
<On> <On>
Strike Wait Off Off Sets up whether to display the Strike Wait menu.
<On> <On>
Slant Check Off Off Sets up whether to display the Slant Check menu.
<On> <On>
Auto Cleaning Off Off Sets up whether to display the Auto Cleaning menu.
<On> <On>
Ink Status Off Off Sets up whether to display the Ink Status menu.
<On> <On>
Roll Length Off Off Sets up whether to display the Roll Length menu.
<On> <On>
Exhaust fan Off Off Sets up whether to display the Exhaust Fan menu.
<On> <On>
Longstore Off Off Sets up whether to display the Longstore menu.
<On> <On>
CR Maintenance Off Off Sets up whether to display the CR Maint. menu.
<On> <On>
Initialization Off Off Sets up whether to display the Initialization menu.
<On> <On>
Life Times Off Off Sets up whether to display the Life Times menu.
<On> <On>
IP Address Off Off Sets up whether to display the IP Address menu.
<On> <On>
Subnet Mask Off Off Sets up whether to display the Subnet Mask menu.
<On> <On>
Gateway Off Off Sets up whether to display the Gateway menu.
<On> <On>
Header dump Off Off Set whether or not to display the Header dump menu.
<On> <On>
Single head Off Off Set whether or not to display the Single head menu
<On> <On>
Heater control Off Off Set whether or not to display the Heater control menu.
<On> <On>
Setup item Setting Description
VJ-2638/
1638X
VJ-1938WX/
1638WX
To Next Page
Loading...
Need help?
General