7. Operation
37
Test Mode
Troubleshooting
Operation
(a) SWITCH TEST
This screen is used to test each switch and button.
SWITCH TEST screen
SWITCH TEST (DRIVE UNIT)
[ON:RED]
COIN 1 011
COIN 2 011
SERVICE SWITCH OFF
TEST SWITCH ON
SELECT SWITCH UP/DOWN OFF/OFF
ENTER SWITCH OFF
STEERING WHEEL +381 : Right OK
GAS 000 :
BRAKE OFF
(a)
(b)
(f)
(g)
(h)
(i)
(j)
(k)
EXIT: SELECT SWITCH (UP) + ENTER SWITCH
(c)
(d)
(e)
ITEM BUTTON OFF
MARIO BUTTON OFF
Item Description
(a) COIN 1 Status of coin switch 1
Each time the switch 1 is activated, the counter increments by one.
000 to 999 (The counter returns to 000 after 999.)
(b) COIN 2 Status of coin switch 2
Each time the switch 2 is activated, the counter increments by one.
000 to 999 (The counter returns to 000 after 999.)
(c) SERVICE SWITCH Status of Service switch
OFF : Normal
ON (red) : Pressed in
(d) TEST SWITCH Status of Test switch
OFF : Normal
ON (red) : Pressed in
(e) SELECT SWITCH UP/DOWN Status of Select switch
OFF : Normal
ON (red) : Flipped up or down
(f) ENTER SWITCH Status of Enter switch
OFF : Normal
ON (red) : Pressed in
(g) STEERING WHEEL Status of steering wheel
Turning the steering wheel to the right changes the numerical value
in the positive direction, and turning the steering wheel to the left
changes the numerical value in the negative direction.
Right (Left) OK (red) appears on the screen when normal right (left)
operation is detected.
(* Note)