10. Click the Aux parameter page.
11. In the Aux 1 section, click the label None of the Dest. (destination) selector.
In the menu that opens, select C1: Sound 1-1.
→
You hear your bass line processed by the FM effect on top of the original bass line! You
can adjust the level of the processed bass line via the Level knob in the same Aux 1 sec-
tion.
In fact, we have just set up a send effect in MASCHINE. As we selected an effect plug-in in
the first Plug-in slot of Group C, MASCHINE automatically made this Sound available as an
output for all other Sounds and Groups of your Project. By choosing this Sound in the Aux 1’s
Output selector of the Group “Bass,” we told MASCHINE to send the audio of this Group addi-
tionally to the FM Sound.
Feel free to experiment with this feature:
▪ Add other effects in Group C’s Sound slot 1.
▪ Route other Sounds or Groups to this same effect.
▪ Adjust each auxiliary level independently.
Using Advanced Features
Using Other Sound Sources
MASCHINE STUDIO - Getting Started - 135
To Next Page
Loading...
Need help?
General
