6. Click the Kick entry to load it into the Plug-in List.
→
The Kick Plug-in is now loaded and is ready to be tweaked.
3.2.2.2 Loading a Drumsynth into a Plug-in List on the Hardware
1. Press the PLUG-IN button to enter Control mode and display the Plug-in slots.
2. Press SELECT + pad 5 to select the Sound Kick Ektl A 2.
3. Press Button 3 to select the SOUND tab.
4. Press SHIFT + BROWSE to select a Plug-in.
If we would have pressed BROWSE alone here, we would have accessed the Browser. By
additionally holding SHIFT, we access the Plug-in menu instead!
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE STUDIO - Getting Started - 45
To Next Page
Loading...
